The main content of this page begins here.
Cyclo® Drives for Motion Control
- Click here for detailed information about speed reducers and gearmotors (Power Transmission & Controls Group page)
|Series||FC-A, F2C-A series (compact type)
FC-T, F2C-T series (high reduction gear ratio type)
F2C-C, F4C-C series (large diameter hollow shaft type)
F4C-D series (high performance compact type)
|Allowable peak torque||330N m-11,000N m
* It differs depending on the product series.
|Reduction gear ratio||1/29-1/119
(1/81-1/171 for the FC-T, F2C-T series)
The elements are reduced to the minimum by using the Cyclo® drive structure. It is perfect for applications where space saving is required, such as robot articulations.
- 2High precision and high rigidity
Backlashless achieved with the Cyclo® drive structure. Moreover, the high rigidity of lost motion 0.5 min-1, 1.0 min-1 is made possible.
- 3Wide variations
Four types of variation are available.
Selections can be made according to the applications of our customers.
- 4Motor assembly
The servo motor installation type is also available for the F4C-D series (compatible with products by major servo motor manufacturers).
Installation is easy. Once the servo motor and reduction gears are directly connected, using a bolt (supplied by the customer), tighten the built in clamp bolt with a hexagonal wrench to secure the input shaft and the product is ready to use straightaway.
Backlash 3 min, 15 min specifications
Catalog No. Z2004 (P1 type),
L2043 (P2 type), Z2007 (PK1 type)
Standard backlash STD series
Low backlash (LB) series (6min specifications)
Catalog No. C2103
Lost motion 0.5 min, 1 min specifications
Catalog No. F2001
- For detailed information about the products please contact
- Products for inquiries
- Cyclo®Drives, Compact Gearmotors, Gearboxes, Motion Control Drives